Every paint contractor has considerably diverse preferences and approaches, but then the professionals all know the trade secrets.
Sand Away Flaws
Highly visible marks, defects, unglazed items, and flaws should be sanded away to achieve a perfectly smooth surface that ends up with a well-polished look. Sanding also removes burrs and rough spots in your trim. Using a fine grit sanding paper on a sanding pole, sand from baseboard to ceiling to ensure that you do this well. Also, sand horizontally along the baseboards and ceiling. Avoid using too much pressure on the pole, or else the head would quickly flip and damage the wall. Make use of a sanding sponge to access crevices.
Use of tinted primer to fill holes
Cover flaws or cracks with joint compound before starting your paint job on walls. The compounds will remove the moisture out of the paint giving it a flat, dull look. Those spots will be noticeable as they are different from the rest of the wall. To avoid this kind of scenario, you need to prime any walls set for painting.
Use a putty knife to press tape
Repeating the painting job after you have finished is frustrating. When you pull off the tape, you are likely to realize that some paint went through. For this reason, you now must scrap it off. To avoid these frustrations, ensure that you thoroughly adhere your tape evenly before you begin painting. The experienced painters would often advise you to use a putty knife to press down your tape to achieve great cover.
Remove Brush and paint marks using Paint Extender
To obtain a finishing that is entirely free of any misfortunes and brush marks, add extra color conditioners such as Floetrol. Doing so brings about two benefits including a reduction in the time required for the paint to dry. With a larger drying window, you can comfortably overlap existing paint without getting any visible marks. The second advantage is that paint is leveled out, thereby eliminating paintbrush strokes.
Scrape ridge in textured ceilings
One thing that everyone has trouble with, painting the edge of ceilings that have textured ridges. With this, it is hard to make out a straight line on wall edges without smearing paint on the roof. There exists a simple solution to this issue. Just use a screwdriver to scrape off texture along the ceiling’s perimeter.
Use canvas drops cloth
An expert would discourage you from using bed sheets and other types of fabric when doing a paint job. Such materials would easily allow paint to seep through to the floor. Use a canvas drop cloth to avoid any inconveniences. Wet paint can easily find its way to your shoe’s sole and spread all over the room as you walk around.
Finish on the first wall before advancing or proceeding to the next one
It may seem simple enough to do one-step all over the room and then come back for the next step. Professional painters greatly discourage this vice. You are most likely to attain optimum results by finishing off one wall completely, then advance to the next one, allowing better blending of rolled paint.
Scrape off windows instead of taping
Taking the time to cover your window is discouraged, as it is a waste of time. Just allow the paint to go to your window, finish your job and let the smeared paint dry. After it dries, scrape it off using a razor blade. Even as you do this, be cautious to avoid damaging paint bond between the glass and wood.
Box paint for texture
It is not evident that two colors paint tins are the same. You will notice a great difference after finishing your project. The best approach is to mix your paint in one container. The mixture would give you a consistent layer of same color paint on your walls. You can also paint directly from the bucket, even though it presents its challenges.
Rinse roller covers
Regardless of the type of roller cover, that you opt to buy, whether cheap or expensive, it is better to rinse it off before your first project. After cleaning the roller with water and liquid soap, remove any loose fibers using your hands.Read More